Circuit Splash

Demonstration of a small motion detection script I wrote for the picamera. This video was recorded before any optimizations were done to the script. Each image is captured at 64x36 then compared to the previous image pixel for pixel based on their RGB value. As I come up with ways to make the script better I will push the changes to GitHub.

Voltage doubler is the circuit where we get the twice of the input voltage, like if we supply 5v voltage, we will get 10 volt at the output. Generally transformers are there to step-up or step-down the voltage, but sometimes transformers are not feasible because of their size and cost. So here is the quick, easy and practical solution to double the voltage, using 555 timer IC.

In this project, we have built an Arduino based heartbeat monitor which counts the number of heartbeats in a minute. Here we have used a heartbeat sensor module which senses the heartbeat upon putting a finger on the sensor.

Why would you want a Web Connected Robot? To play with of course. Drive your robot from across the room or across the country, using nothing more than Skype and a web browser (nothing to install on the controlling computer). After that?

The same is also true for keeping items cool – it can be wasteful to run a whole fridge just to make yoghurt – but with a temperature controller, the principle is the same. Instead of activating a heating element, you’ll be activating the plug on a mini-fridge or other cooling element, like a Peltier (thermoelectric cooler) – and of course, the logic will be reversed.